Products & Services
Core Areas of operation
Design, Engineering, Detailed Engineering, GA Drawing, P&ID, BOQ,Manufacture, Fabrication, Supply, Installation, Testing & Commissioning of:
- Roof Top Solar Power Plants
- Cold Rooms
- Clean Rooms &
- HVAC turn-key Projects
- Indoor Air Quality (IAQ) – we specialize in smoke, heat and odour removal
- Dust Collectors and Pollution Control Equipment (turn-key projects)
- Commercial Kitchen Ventilation (turn-key projects)
- Generators & Electrical Contracting, BMS, DCS, Control Panels and PLC programming.
- Ferrous and Non-Ferrous Metal Fabrication
- 1. Solar Systems
- 2. Cold Room
- 3. Clean Room
- 4. Ventilation
- 5. PEB
- 6. Lighting Systems
- 7. Surveillance & Security Systems
A. Solar On / Off Grid Rooftop Systems
Power consumption load in commercial establishments is usually very high. Solar rooftop PV systems make use of free space available on roofs. These systems are used to maximize building energy efficiency, implement renewable energy measures to achieve green building certification and cater to power outages.
Solar PV modules can be mounted on the free space available on roofs to convert the sun’s energy directly into electrical energy. The electricity produced is direct current (DC) which is converted into alternating current (AC) with a Power Conditioning Unit (PCU). The AC power can either be consumed immediately in sync with the grid/other power sources or stored in batteries to be used during power outages/night time to drive critical loads.
Unavailability of solar radiation during rough weather and night time usually makes it difficult to make or store power in order to deal with power outages. The solution to this problem can be an off grid solar system or stand-alone system. This system balances the mismatch between the electrical load and the electricity produced, and the power is supplied as per the application requirement (DC Load or AC Load), with the help of some energy storage devices like batteries.
These off-grid solar systems are usually suited for rooftops of small homes, offices, malls, hospitals and such establishments.
A small solar panel of 1 KW for a home power plant is adequate to drive a load of approximately 300 watts for four hours with a small battery bank, depending on solar irradiation in the area. The solar panels for homes, office and such establishments directly convert solar energy to electrical energy. This can be used immediately to drive loads or stored in batteries for usage at time of power outages.
The Residential solar energy system does not require maintenance; regular cleaning of modules can keep the system up and running.
The biggest challenge in implementing government policies and other development programs in rural areas and homes is lack of infrastructure. Many areas are still not connected to the grid. The only answer to the problem is decentralization of power generation. This is where Off Grid solar energy systems can play a major role.
As the name suggests KCP Solar grid-tied power plant works tied up with the main EB Grid.
It is a without battery technology, the generated solar power is given to the load of the consumer.
The excess power which the consumer does not consume during morning is fed back to the main grid through NET-METERING technology which is enabled by TNEB to the applied consumers.
The no of units which the consumers export to the main grid is subtracted from their main EB consumption and the net bill is calculated.
- 2.5 Kw inverter for a 1.5 and 2.5 Kw system ,so that in future solar generation capacity can be expanded up to 2.5 Kw without spending the cost for the change of inverter.
- 25 years output warranty for the solar panel, also 5 years for our inverter which can expanded up to 10 years based on agreement.
- Total system life time guaranteed for 25 years.
Consume your own solar power when it is available and the utility grid is working.
Purchase electricity from the grid when sun does not shine.
Sell excess of solar power to the grid and subtract the total power imported from utility grid (net metering).
The no of units which the consumers export to the main grid is subtracted from their main EB consumption and the net bill is calculated.
- Ranges from 3 Kw to Mw.
- With mono/poly crystalline and thin-flim solar modules.
- With Fronius inverter from Austria, which can be warranted up to 20 years.
- 100 % Accelerated Depreciation.
- Income Tax benefit.
- Pay Back within 4 to 5 years.
B. Solar Water Pumps
A solar water pump has a mini power house at its heart and consists of a calibrated and matching solar array of modules – tuned with the equivalent power of pump for that particular application. The solar water pumping system is capable of running all types of electrical water pumps with applications varying from irrigation to household demands. Irrigation pumps such as submersible, surface or deep well can also be coupled with drip irrigation systems to enhance the returns from this configuration.
A typical solar water pumping system is known by the sum total of solar array size that is required to run the attached pump. A 1000 Wp solar water pump is capable of drawing and pumping approximately 40,000 litres of water per day from a source that is up to 10 meters deep. This is sufficient to irrigate about 2 acres of land with regular crops. A 1000 Wp solar water pump helps save up to Rs 45,000 when compared to equivalent use of a diesel-operated pump over a year.
Features & Benefits
- Available in both type surface and submersible.
- Applicable for all type of bore, ponds etc.
- Maintenance free/Low DC/AC branded pumps fit and forget.
- No any running cost, freedom from electricity bills.
- Complete mounting structure(powder coated) with tracking system.
- It can supply water at flow rate of 1000L/min or more
- It can work for more than 100 meter depth
- It can be installed in any remote areas
- Properly designed AC drives to run AC pump with solar modules
- MNRE approved
- Subsidy from MNRE and other state(India)nodal agency is available
- Long operating life
- Highly reliable and durable
- Easy to operate and maintain
- No fuel cost- uses abundantly available free solar energy
We provide cold storage solutions for all types of facilities including Multi Produce, Palletized, Pre-Cooling Rooms, Control Environment Storage, Banana Ripening facility, Potato cold storage, modular cold rooms and Ice cream & dairy products.
What We Do:
- We have deep expertise in end to end execution of cold chain facilities.
- Our professional experience lies in all areas of cold chain operations – such as design, supply, installation & commissioning, operations.
- Our capability is based on our collective knowledge and technology partnerships with leading international cold chain product suppliers, solution providers.
Our Service Commitment
- As a team, our collective goal is to build lasting relationships with our customers. Our sales and service team acts as an ambassador of Arctic Refrigeration, taking complete ownership from inception to completion of the project.
- We take pride in serving our customers 24 X 7. Our people demonstrate highest level of professional excellence and continuously innovate to build robust refrigeration solutions for our customers.
- Our leadership is committed to keep a culture of service excellence which is benchmarked with International standards.
Our Solution and Service Offerings
Dairy Equipment, BMC, Chilling Plant, Milk Silos, Pasturisers, Incubators.
Consulting, conceptualization, planning, design & budgeting.
- Material Supply, Installation & Commissioning of complete Turn Key construction project including.
- Civil works, PEB structure, electrical systems, refrigeration systems ,IQF , Ripening Units, Truck Refrigeration System & other customized solution as per customer requirements.
Material Supply, Installation & Commissioning including;
- Prefab Panels , Automated /Manual sliding/swing Door , CA Doors, High CFM & Humidity Slim/Cubic type indoor units, Industrial Evaporators/Systems, Racking, sorting , grading & washing line
- Compressor Racks , Microprocessors Controllers, Condensing Units Internal Lacking/Mezzanine , Bins for Storage, Docking levelers, shelters and overhead sectional doors.
- Air Cooled/Water Cooled Condensers, Pre-engineering Building Structure etc.
Quality Monitoring Solution Implementation for cold chain network such as Ware House Management System, Transport Management System including;
- Identifying the quality of perishable items
- Timely identification of spoilage , and its causes
- Monitor the temperature and Humidity and the shelf life of various perishable items at respective stage of the cold chain.
We provide complete range of refrigeration products for cold storage facility including;
Suitable for High Ambient
Quick Pull down
Low Power consumption
Hermetic, Semi Hermetic , Scroll, Screw Compressor Condensing Unit.
High CFM, High Air Throw
Fan Dia 300mm to 800mm.
Works in range of 20 ͦC to -40 ͦ C
External Rotor Fans
A cleanroom is a controlled environment where products are manufactured. It is a room in which the concentration of airborne particles is controlled to specified limits. Eliminating sub-micron airborne contamination is really a process of control. These contaminants are generated by people, process, facilities and equipment.
They must be continually removed from the air. The level to which these particles need to be removed depends upon the standards required. Strict rules and procedures are followed to prevent contamination of the product.
The only way to control contamination is to control the total environment. Air flow rates and direction, pressurization, temperature, humidity and specialized filtration all need to be tightly controlled. And the sources of these particles need to controlled or eliminated whenever possible. There is more to a clean room than air filters. Cleanrooms are planned and manufactured using strict protocol and methods. They are frequently found in electronics, pharmaceutical, biopharmaceutical, medical device industries and other critical manufacturing environments.
We classify Clean Room in to two broad categories; Operation Theatres and Pharma -Biomedical.
In Opeation theatres we undertake turnkey installations such as Laminar flow, Pendents, Lighting and ceiling. In Modular OT we do the complete design, engineering, laminar flow, return -air risers, anti static flooring, Pendents, Lighting Gas piping and control valves and complete control panel comprising BMS. We can undertake any class of clean room from Class 1Lakh to Class 1000.
In the Pharma-Biomedical sector we do clean rooms for any application from manufacturing, process, research, storing to re-use and re-cycle. We also do food grade FDA approved dust collectors which are made of pure stainless-steel. We also design manufacture, install and maintain pharma dust collectors for re-use, vent and discard purposes.
In all projects we strictly comply with NABH, FDA & ASHRAE regulations and guidelines.
We are Specialists in Ventilation, Kitchen and Pollution Control – Design, engineering, fabrication installation and commission of complete turnkey projects
COMERCIAL KITCHEN VENTILATION:
Commercial kitcehn ventilation is most complex subject which has a combination of heat, sparks, smoke, smell, moisture and OIL We specialized in the design of KITCHEN VENTILATION covering in detail the following areas:
- Hood Ventilation (Island Type & Canopy Type)
- Maintaining Negative & Positive pressure inside the kitchen(Fresh/Make up air)
- Cooled Fresh Air Ventilation
- We can also do the complete Design Engineering, Fabrication, Supply, Installation, Commissioning of the complete ventilation system for Industrial Kitchens specifically for Star Hotels.
- Combination Four in one Ventilation Fan(Exhaust Fan + Grease smoke Collector + Order Control + Fire trap device)
- New Unbeleivable Kitchen exhaust fan....The Rotoclone!
Indoor Air Quality for Bars, Cafe, Kitchen & Discotheque. We can maintain a perfect balance of fresh air, pressure and Ionization level as clean and as fresh, you would feel in front of a greenery surrounded water falls! We do this by a method of Fusion/Combination self contain filtration units called “ECOLOGY UNITS”.
We offer complete Design, Engineering, Manufacture, Supply, Installationand Commission of ECOLOGY UNITS in the Following Combinations.
- Fabric Filter + Carbon Filter + Deodorizer & Ionizer
- Metallic Filter + Electro static Precipitator + Carbon Filter + Deodorizer & Ionizer
- Self Cleaning type Ecology Unit:(Metallic Filter + Electro static precipitator + Deodorizer & Ionizer)
By which we can ensure 99.5% efficiency in most cases depending upon inlet dust laden and ambient conditions.
- Ventilation (specifically Kitchen & Laundry Ventilation for star hotels)
- Air conditioning, Indoor Air Quality & Pollution Control (Commercial& Industrial)
- HVAC Maintenance (Hotels, Hospitals, Towers)
- Clean Rooms (Hospital and Industrial Manufacturing)
- Refrigeration (Cold Rooms, refrigerated Cabinets and storages, Merchandising coolers)
We are specialist supplier/ contractor of Air pollution Control Equipment and Systems to the Steel/Cement Industry . We have recently started operating from this Chennai office catering to South India. We have a local presence with a manufacturing facility in Chennai, TN, which brings us closer to our customers in this region by way of efficient and quicker service.
We undertake Dry Fabric filters, filter bags and Bag houses. We also do catrdige collectors, wet collectors and Electrostatic Precipitators. We also stock and sell a huge number of spares like filter bags, venturies, soleniod valves, DP switchs, DP controllers and Fans.
We have pride to introduce ourselves as one of the leading Turnkey Engineering & contracting company in the field of Pre-Engineered Buildings, Pre- fabricated Panels, Metal Roofing & Wall Cladding and other building related activities.
We have established facilities in chennai to deliver Pre-Engineered Buildings of large nature, and have further enhanced the capability to execute the Pre Engineered Buildings of any magnitude and with minimum time schedule, which is the prime requirement of today building industry. We are specializing in providing turnkey solutions in Pre Engineered Building. As part of our turnkey offerings, we are pleased to present our services in the field of manufacture of Pre Engineered Buildings, their complete field erection coupled with necessary Roofing and Cladding. We provide cost effective, value for money service to our valued customers.
Our PEB designs follow the latest MBMA, IBC Codes as well as IS Codes featuring best grades of steel . Complete design work is carried out in our dedicated design centers. Our Design team is well equipped with trained and experienced design engineers along with design drafting facilities like AutoCAD, STADPRO, Customized software and are capable to deliver the best of the Pre Engineered Building Designs.
WE can offer various types span and heights of PEBs suitable for Warehouses, Cold storages, Clean rooms and indsutries
A. LED Street Light
Supplier of LED Street Lights, LED Street Lights, 18 Watts LED AC Street lights, 16 Watts LED Street lights, 30 Watts LED Street lights and 24 Watts LED Street lights,70 Watts LED Street lights.
B. Highmast Lighting System
Supplier of High Mast lighting systems
CCTV security system is used for surveillance purpose to monitor the areas such as House,Office,Factory,Banks,Stores,SchoolsColleges,and more. It controls the crimes and gives the safer & peaceful life. You can record the video and you can play it back whenever you want. Many more type of cameras are available depending upon their coverage distance and clearity.
CCTV cameras are normally categorised by Dome camera, IR camera, IR dual camera, IP camera, CS Mount camera, WDR camera, Zoom camera, and Speed dome camera. Indoor camera & Outdoor camera are the two types, categorized by the camera's body. As their name indicates, indoor cameras are used for indoor applications and outdoor cameras are used to outdoor applications.